Witura WT-9001 IP65 Instrukcja Użytkownika Pobierz pdf (Strona 11)

WT-9001 IP65 GSM Remote Control And Alarm System

WT-9001 IP65 – USER MANUAL – Rev. 3.4 – Technical Support: technical@witura.com

You can program the WT-9001 via SMS commands using your phone. Any programming

command sent by SMS must be in CAPITAL letters. The fields between square brackets

are parameters; do NOT enter the square brackets. When you send a command, you will

receive the answer for the first time even if your GSM number is not in the administrator

list. This happens because the WT-9001 recognizes any GSM number as administrator

and answers to it.

Attention: Please program the WT-9001 unit systematically begin with programming the

administrator number.

The 20 administrator numbers can be programmed with a text command via SMS.

Text Command:

*TEL[N]#XXXXXXXXXX

N stands for administrator number 1 - 20

XXXXXXXXXX stands for the phone number you want to program as administrator.

Please note that it is possible to program up to a maximum of 16 digits for a phone

number.

Example:

To program phone number 1111222233 as administrator into list number 1, you would

send the following SMS command to the unit.

*TEL1#1111222233

When the WT-9001 received the message, the LCD will display…

WT-9001

After the SMS command has been processed, the message icon will disappear and the

system will shows “OK” indicate the setting has changed.

5. WT-9001 IP65 PROGRAMMING INSTRUCTIONS (via SMS Only)

5.1 Programming the Administrator Number

Message

received

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Brak uwag

Witura WT-9001 IP65 Instrukcja Użytkownika Strona 11